Product Series
Contact Us
Mailbox:
tiehu@tiehupetro.com
Telephone:
86-317-2616808
Address:
Yanling Industrial Zone, Renqiu City, Cangzhou City, Hebei Province, China
SanmingIndependent oil and water well pressure operating machine DYJ65/35DD
Category:
SanmingOil and water well pressure operating machine
Product Description
Independent oil and water well pressure operating machine DYJ65/35DD
Introduction:DYJ65/35DD operating machine with pressure is an independent boom structure, which can meet the needs of oil and water wells under pressure construction within 21MPa. The whole set of equipment consists of wellhead host, power plant, mast system and accessories. The power device is of box skid-mounted structure, which provides hydraulic power for wellhead operation and can remotely control the switch of safety three-ram BOP. The host device is of integral frame type combined structure, equipped with upper platform console and winch console to control the host device except the safety ram BOP, and equipped with passive turntable, which can cooperate with the pressure rotation operation of the power faucet.
Features:
► Independent boom structure, operation without workover rig, small footprint, no construction site restrictions;
► Lifting cylinder using HUSCO control system, high operating speed, comparable to the auxiliary equipment, good stability
► Low operating costs
Serial Number | Name | Specifications and models | Unit | Quantity |
annulus sealing system | ||||
1 | Safety three-ram blowout preventer | 3FZ18-35 | Taiwan | 1 |
2 | Work Order Ram BOP | TFZ18-35 | Taiwan | 2 |
3 | annular blowout preventer | FH18-35 | Taiwan | 1 |
4 | balanced pressure relief system | Including four-way, hydraulic flat valve, etc. | Sleeve | 1 |
Column lifting/pressing system | ||||
5 | Lifting hydraulic cylinder | Stroke: 3500mm | Root | 2 |
6 | Passive turntable |
| Sleeve | 1 |
7 | Fixed slip bracket |
| Sleeve | 1 |
8 | Tapered slips | KWZ18-70T | Taiwan | 4 |
Control System | ||||
9 | Upper platform console |
| Sleeve | 1 |
10 | Drawworks console |
| Sleeve | 1 |
mast winch system | ||||
11 | Mast | Including 2 sets of winch | Sleeve | 1 |
12 | Hydraulic tong boom |
| Sleeve | 1 |
Frame structure | ||||
13 | Upper platform assembly |
| Sleeve | 1 |
14 | Middle platform assembly |
| Sleeve | 1 |
15 | Lower Platform | Including outrigger cylinder | Sleeve | 1 |
16 | Column |
| Root | 4 |
17 | Frame accessories | Stabilizer, support, etc. | Sleeve | 1 |
2. power source device | ||||
1 | Protection Room | Including base | Sleeve | 1 |
2 | Engine skid | 360HP | Sleeve | 1 |
3 | double vane pump |
| Taiwan | 2 |
4 | Triple vane pump |
| Taiwan | 1 |
5 | Hydraulic oil tank | 2300L | Sleeve | 1 |
6 | Accumulator group | 200L | Sleeve | 1 |
7 | Hydraulic oil radiator |
| Sleeve | 1 |
3. auxiliary device | ||||
1 | Main engine & power source/hydraulic control connecting hose assembly | 30 m/root | Sleeve | 1 |
2 | Sling | Flat crane, vertical crane and power source hoisting | Sleeve | 1 |
3 | Ladder | 45 ° ladder, guardrails on both sides | Sleeve | 1 |
4 | Escape Chute |
| Sleeve | 1 |
5 | Oil pipe slide |
| Sleeve | 1 |
6 | foundation pier |
| Piece | 4 |
7 | Mast transport skid |
| Sleeve | 1 |
8 | Hydraulic Line Wireframe |
| Sleeve | 1 |
Technical parameters of the whole machine
► Operation form with pressure: independent boom type;
► Control mode: upper platform console control;
► Power form: diesel engine drive;
► Rated working pressure (static seal): 35MPa;
► Rated working pressure (dynamic seal): 21MPa;
► Device diameter: φ186mm;
► Cylinder stroke: 3500mm;
► Rated lifting load: 65T;
► Rated pressing load: 42T;
► Rated load of mast: 2T;
Rated load and quantity of drawworks: 1T × 2;
► Operating pressure of hydraulic system: 21MPa;
► Engine power: 360HP(264 KW);
► Wellhead device height (from lower flange of three-ram BOP to above the traveling slip):6700mm;
External dimensions of power source: 6500 × 2400 × 2500mm
► Temperature grade of pressure-bearing metal material: T-20/250(-29 ℃ ~ +121 ℃);
Temperature grade of non-metallic sealing material: BGB(-18 ℃ ~ +93 ℃)
► Working environment temperature:-20 ℃ ~ +50 ℃.
Hebei New Tiehu Petroleum Machinery Co., Ltd.
Sales Line: +86-317-7651717
Telephone:+86-317-2616808 -8009
Mailbox:tiehu@tiehupetro.com
Address: Yanling Industrial Zone, Renqiu City, Cangzhou City, Hebei Province, China
Focus on us
Follow us